| Max Load Current |
AC5A, 10A, 20A, 30A, 40A |
| Control System |
Phase control |
| Applicable Load |
Linear (R) load |
| Input Signals |
4 to 20mA DC |
| Input Impedance |
540Ω (with 20-mA input) *Built-in constant voltage circuit: 5V |
| Load Voltage |
AC100~220V |
Permissible Voltage
Fluctuation |
Within +/-10% of the rated load voltage |
| Leak Current |
5 mA or less (at 200 VAC) |
| Insulation System |
Photo-triac or Photo-coupler |
| Insulation Resistance |
Over 100 MΩ (500-VDC megger) |
Insulation Withstand
Voltage |
1500 VAC for one minute |
Permissible Ambient
Temperature Range |
0°C to +40°C (If the ambient temperature exceeds 40°C, see the load current characteristic diagram) |
Permissible Ambient
Humidity Range |
45 to 85% RH
|
Environmental
Conditions |
No exposure to corrosive/flammable gases, dust or vibration |
| Cooling System |
Self-cooling by radiator fins |
| Installation |
Installation DIN rail-mounted or wall-mounted |
| Notes: |
 |
1. Use this product for temperature control exclusively in consideration of its
input/output characteristics
2. This product cannot be equipped to heaters with special characteristics such
as Kanthal Super and Siliconit heaters
3. Use this product in one-to-one combination with a temperature controller |
| > To Top |
|
|
|
|
|
|
|
|
|
